Equipment

(under Construction)

Pulsing Circuit

Cell Kit

Gas Flow Meters

• Acrylic & Polysulfone Flow meters here (Australia)

• Acrylic & Polysulfone Flow meters here  (USA)

If your wanting to do it still very accurately but just from everyday materials that you may find around the house try this.

This information is supplied by Tero Ranta

"First you take for example a bucket and fill it with water. Then you
take a coke bottle (say 0.5 liter). Fill that coke bottle fully with
water and screw the cap on.

Put the water-filled coke bottle in the water bucket upside down so
that the cap and neck are under water, but rest of the bottle is on
top of the water.

Then screw the cap open while the bottle is positioned like this.
Make sure that the bottle is fully filled with water with no air
bubbles inside it. Then put the electrolyzer output gas hose under
water level and position the tube so that the gas bubbles into the
coke bottle and at the same time pushes out the water that's in there.

Measure the time it takes for the gas to fill the bottle. If you know
the volume of the bottle you can then calculate the gas production
rate."

Tero

and here is a simple way to calculate Litres per hour

This information is supplied by Tero

"if it takes 30 seconds to fill 400ml bottle,
the gas production rate is 3600/30*0.4 = 48LPH"

Calculate The Efficiently Of Your Cell

• See Warj's Calculators here (Part 8)

• Tero's Electrolysis Calculation (Based on Faradays Law)

• Electrolysis Site

• Electrolysis calculator

Voltage Intensifier Circuit Parts and Information

• (parts coming soon)

Learn more about winding inductors here

 Low Voltage Equipment/Supplies

Electrolyte

• Potassium Hydroxide (KOH)  (Do a search under Potassium Hydroxide)

Flashback Arrester

• see here

Online Metal Supplier

• see here (Online Metals.com)

To discuss this further please visit the forum here.